Walking Stick Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,951 Posts
Nice job setting the coin in. Not sure what you have available in your area. I would try searching online for clear casting epoxy or clear casting resin. They also make clear polyester resins for casting that would work too. If you have any large craft or hobby stores in your area they might have some.

I would get something made specifically for casting. It will probably work out cheaper and will certainly work better for the job than hardware store epoxy made for gluing things together.

Rodney
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top