Walking Stick Forum banner
1 - 9 of 9 Posts

· Registered
3,075 Posts
Discussion Starter · #8 ·
Hi Rad.

I used a 10 " x 7/8 " Half round rasp to set the swirl line. Then I used a 1" X 3" drum sander on my Foredom to finish the swirl and round the edges. I use the drum that you use sheet sandpaper with, not the sanding sleeve that fits over the drum. Started with 80grit worked down to 220 grit. I just like that drum because of it flexibility to use many grits and types of paper.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.