Walking Stick Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
131 Posts
A really fun place to look for this kind of stuff is http://www.mcmaster.com

They have pretty much anything you could want.

I would think you could achieve the look you want with either aluminum, or a nickle alloy. Of course tin has a melting point of only 425-degrees if you want to explore the world of casting.

If the piece will not be subject to great stresses and uses, you might try the nickel shim stock http://www.mcmaster.com/#shim-stock/=nqd34z
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top