Walking Stick Forum banner

My latest stick

2719 Views 7 Replies 5 Participants Last post by  AAAndrew
2
One piece oak turned on my lathe and french whipped.

F4A8EEFB-D90D-4AA9-B547-C7F76B3B4961-829

81F849DC-78B2-49F9-B95F-18FC7F7229CE-829
See less See more
  • Like
Reactions: 1
1 - 8 of 8 Posts
Nice job! Clean and functional. Are you going to put a tip on the end or call it complete?
Nice job! Clean and functional. Are you going to put a tip on the end or call it complete?
It has a rubber bumper now. Few Ive made I turn them to fit a 1" socket and use a few of my old ratchet type sockets as a metal ferrul.
  • Like
Reactions: 1
Nice staff! :thumbsu:

What are the dimensions?
That is similar to wear I started a few years ago.

Here is a stick that I just finished for a guy in MA. I carved the Cobra staff out of maple and finished it with a black dye and deft. My carving started as a hobby and now is a small (very small business). More of my carvings can be found at www.handcarvedwalkingsticks.com and www.creationcarvings.com.

Attachments

See less See more
I'm curious about the French Whipping. Is that cord or tape? Hard to tell from the picture. Whipping usually means cord. Very nicely done if tape, extremely impressive if cord.
I'm curious about the French Whipping. Is that cord or tape? Hard to tell from the picture. Whipping usually means cord. Very nicely done if tape, extremely impressive if cord.
It is white mason line.
Wow. How much line did you need to create a whipping that large?
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top