Walking Stick Forum banner

Pizzel Stick

2421 Views 5 Replies 6 Participants Last post by  gdenby
how many of you guys have heard of this

A pizzel stick is made from a bulls penis

To make one you need a bulls penis wash it it in warm soapy water then hang to dry tie a weight on the (about 14lb or a couple of bricks for weight) end of it to stretch it.,push a steel rod through the penis before it dries out to much then leave to dry completely.it takes about 5- 6 weeks to dry out. (some people use a fibreglass rod to reduce the weight)The rod is used to fit a handle on.

Use sand paper and steel wool on it and give it 5-6 coats of varnish

Personally I haven't made one but quite a few people have.

That's the basics of making one I do have more info if anyone wants to make one

Does size matter yes in this case it does "you need a big un" because shrinkage is considerable .It is also possible to make a equine version
1 - 1 of 6 Posts
Good grief. I couldn't help but cross my legs when I read this post.
  • Like
Reactions: 1
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.